Q & A – Prestige Vapo | Vape jetable maroc

In most contries, they are not illegal. But your local laws may vary. So check with your local government before purchasing or using a disposable vape pen.

Disposable vapes offer convenience and affordability while providing the same great experience as smoking. If you don’t have time to clean your device after every use but still want the satisfaction of vaping, then disposables are the right choice for you!

Yes. Disposable vapes are safe when used as directed by the manufacturer. However, they should not be used by children and teenagers due to the presence of nicotine in their e-liquids. The reason is that they are made of plastic and contain nicotine, which is highly addictive. In addition, the chemicals in disposable vapes can also be harmful to a child’s health.

It depends on how often you use them and what kind of product you’re using. So far, there are no reports of any adverse side effects from disposable vapes. Still, there’s always a risk when using any product that contains nicotine or other chemicals that can be harmful if misused (for example, if you swallow the e-liquid). If you’re concerned about long-term health risks associated with vaping or smoking, talk to your doctor about ways to minimize them or quit altogether!

There are five common e-liquid flavors on the market:
Tobacco flavor: imitation tobacco (that is, imitating the aroma of existing traditional cigarettes, such as Zhonghua, Furongwang, Liqun, Marlboro, etc.); ordinary tobacco (that is, using a variety of tobacco and edible flavors, with a unique mixed tobacco aroma, such as mild tobacco, nut tobacco, classic tobacco, etc.).
Fruit flavor: It is the most variety of flavors on the market today. Common fruits, such as apples, mangoes, lemons, watermelons, grapes, blueberries, etc., each fruit can be made into different taste directions according to their different tastes at different maturity periods, such as green apples and red apples, ripe mangoes and Green mango, watermelon flesh and watermelon rind, etc.
Herbal Flavor: imitates the taste of herbaceous plants. Such as mint, vanilla, licorice, etc.
Beverage taste: imitate the taste of various beverages. Such as cola, Fanta, coffee series, red wine series
Tea flavor: the taste of imitation tea drinks. Such as Dahongpao, Tieguanyin, Oolong tea, Longjing tea, Dancong tea, etc.
To enrich the product line of e-liquid, e-liquid manufacturers have developed the above-mentioned common e-liquid flavors. In recent years, more e-liquid manufacturers have begun to turn their research and development to the functionality of e-liquid.
The so-called “functionality” actually means that one or several ingredients with special effects are added to the commonly used e-liquid formula so that the finished e-liquid has a special effect in addition to its taste. for example:
The sleeping effect of CBD (cannabidiol, mainly used in the medical field, is the non-addictive part of cannabis), in simple terms, it can soothe people’s minds and body);
Skin rejuvenation and whitening (contains skin rejuvenation and whitening agents to have antioxidants that can delay skin aging and inhibit pigmentation);
Melatonin (also known as melatonin, melatonin, melatonin, and pineal hormone, the main purpose is to delay aging and improve sleep);
Vitamins (vitamins, also known as vitamins, are a class of organic substances necessary to maintain human life activities and are also important active substances to maintain human health)

For general e-juice, the label “xx mg” refers to the nicotine content in 1 gram of e-juice, not the nicotine content in a bottle of e-juice. The nicotine content in e-liquids usually has the following concentrations: 0 mg per liter, 6 mg/ml, 12 mg/ml, 18 mg/ml, 24 mg/ml, and 36 mg/ml; the levels of the nicotine currently on the market are not the most Strong is only stronger, but in general, regular manufacturers will launch 24 or 36 mg of e-liquid per milliliter at most. Do not use some ultra-high concentrations of e-liquid.

In a pack of cigarettes, there are marked “nicotine content 1.0mg, 1.2mg”, etc., where 1.0mg and 1.2mg refer to the nicotine content in a cigarette. If you feel that you need a liquid between the above concentrations, you can buy a mixture of two groups of different concentrations and do simple addition and subtraction, such as 3=(0 6)/2 Calculate the nicotine content in a cigarette: For example, if you smoke a cigarette, The nicotine content of each cigarette is 1.1 (nicotine content = nicotine amount, there will be a mark on the left side of the cigarette case) that is as follows: 1.1 × 20 cigarettes = 22 mg The average person consumes about 2 to 4 ml of e-liquid a day. It is recommended to choose 11 mg for two milliliters a day.

The e-liquid is added in a certain proportion and has a specific viscosity and fluidity. If the e-cigarette leaks oil, the ratio of propylene glycol and glycerol should be adjusted appropriately. The oil leakage is also very likely to be related to the environment. The use of electronic cigarettes in a high-altitude flight and a low-pressure environment will also separate the substances in the e-liquid (PG, VG), which may lead to oil leakage and penetrate the battery. Medium and low voltages are also likely to cause bubbles in the battery, thus affecting the short circuit of the switch.

There is no best, only better. The first is fruit flavor. Fruit flavor is a common e-liquid flavor list. It has always been the mainstream of the market and has the most types of spices. At present, new flavors are still emerging. Not all of them are shown here, but they are all representative. Almost every fruit flavor has a brilliant finished commercial e-liquid. To be more specific, the popular e-liquids include watermelon ice, white peach oolong, mung bean, old popsicle, taro ice cream, classic tobacco, Zantiejian (mint), etc.

There are thousands of people and different flavors of electronic cigarette oil. First of all, you can choose according to your personal preferences. Secondly, try to choose the best-selling products in the market and choose products with a delicate aroma, pure taste, reduction degree, and layering. When choosing big brands and hot-selling products, the raw materials and spare parts are all certified by strict testing qualifications. The first is the issue of safety, and the second is the guarantee of after-sales.

Electronic cigarettes are not without risks and are relatively safe. A 2018 study by the National Academy of Sciences, Engineering, and Medicine noted that nicotine e-cigarettes instead of traditional cigarettes could reduce smokers’ exposure to “multiple toxicants and carcinogens.” A series of studies and results show that e-cigarettes also emit harmful substances, but 95% fewer harmful substances than traditional cigarettes. E-cigarettes seem to be less harmful to individuals than cigarettes.

An op-ed published on December 13, 2019, in the journal Science, written by scientists from The Ohio State University, Emory University, New York University, and Columbia University School of Public Health. Scientists believe that while e-cigarettes are not 100% safe, e-cigarettes are a safer alternative to cigarettes and can help people quit smoking.

Consumers of e-cigarettes, volunteers of the Queen Mary Institute of London University, Dr. Peter Hayek, and Professor Robert West, a leader in the study of addictive substances in the UK, all spoke out for e-cigarettes. After a series of medical experiments on electronic cigarettes and related products, reassuring results have been obtained. “Most people think that nicotine itself is a dangerous toxic substance, but if it is high-purity nicotine, the health impact of safe intake is similar to that of drinking coffee every day.”

At present, there is no apparent safety standard for electronic cigarettes in China, but if an enterprise wants to become more substantial and more significant, it must have the most basic sense of social responsibility and strictly control each technology. Presently, the standard testing of electronic cigarettes on the market is divided into three categories: the routine testing and certification items of electronic cigarette finished products, the routine chemical testing items of electronic cigarette oil, and the routine chemical testing items of electronic cigarettes.

1. EU RoHS Directive;
2. EU REACH regulations;
3. EU TPD test and notification;
4. FCM food contact material test;
5. US FDA testing and registration;
6. Battery transportation safety certification UN38.3EN/EC62133, SDS/MSDS, etc.;
7. EU 2006/66/EC and US Public Law 104-142 for battery chemical hazardous substances;
8. EU CE certification;
9. American FCC certification;
10. Korea KC certification;
11. Japan PSE certification;
12. Other testing requirements specified by retailers and brands

1. Propylene glycol;
2. Vegetable glycerin;
3. Nicotine;
4. Diethylene glycol;
5. Nitrosamines;
6. Diacetyl (2,3-butanedione);
7. Phthalates (17m);
8. Heavy metal (As, Pb, Hg, Cr, Ni, Cd etc)

At present, there are mainly the following five categories for electronic cigarette smoke testing on the market:
1. Nicotine
2. Impurities in PG an VG (Ethylene glycol, diethylene glycol)
3, aldehydes and ketones (formaldehyde, acetaldehyde, acrolein, crotonaldehyde) Carbonylsformadehyde, acetaldehyde, acrogenic, Crotonaldehyde
4. Nitrous acid (NNn, n-nitrosonornicotine, NNK, 1-(3-pyridyl)-1, butanone TSNA (NNN, NNK)
5. Heavy metals (Cd, Cr, Cu, Pb, Ni, As) Trace metals (Cd, Cr, Cu, Pb, Ni, As)

Electronic cigarette equipment needs to be tested for safety in terms of structure, electrical properties, heat resistance, and flame resistance of materials according to GB4706.1
On May 10, 2016, the U.S. Food and Drug Administration (FDA) issued a final rule regulating e-cigarettes, cigars, pipe tobacco, and hookahs to protect public health. The U.S. government’s 2019 Family Smoking Prevention Tobacco Control Act grants FDA the authority to regulate all tobacco products but only requires FDA to regulate cigarettes, cigarette tobacco, smokeless tobacco, and homemade cigarettes.
To regulate all other products, FDA must issue a new rule that “deems” these products to be within FDA’s regulatory purview. Through the FDA Deeming Tobacco Products Regulation, the FDA can legally supervise the manufacture, import, packaging, labeling, advertising, promotion, sales, and distribution of ENDS (Electronic Nicotine Delivery Systems) electronic nicotine delivery systems. ENDS includes, but is not limited to, atomizers, vapes, hookahs, electronic cigarettes, and electronic pipes.
At the same time, the object of supervision also includes the components and parts of ENDS but does not include accessories. “Component” and “portion” include components of software or materials that are intentionally or reasonably expected to alter or affect the performance, composition, composition, or characteristics of a tobacco product; or are used with or directly in the routine consumption of tobacco products Consumption. Examples of components and parts of an ENDS include, but are not limited to, e-liquid, glass and plastic containers for e-liquid, mods, atomizers, batteries, etc.

Parts materials and additives must be tested in accordance with the national food safety standards GB 4806.4, GB 4806.5, GB 4806.6, GB 4806.7, GB4806.8, GB 4806.9, GB 4806.10, GB 4806.11 and GB 9685.

E-juice needs to undergo 17 major categories of e-juice quality and safety testing items, and 54 specific indicators can be used in production after passing the test.
1) Nicotine testing according to California 65 requirements
2) Determination of 4 specific nitrosamine compounds according to FDA technical documents
3) Test for harmful substances such as propylene glycol and diethylene glycol in e-liquid.
4) The heavy metals in e-liquids are determined with reference to the USP USP method for heavy metals in nicotine.
5) Test the microbial content and preservative efficacy of electronic cigarettes concerning the requirements of the United States Pharmacopoeia USP
6) TRA Toxicity Analysis – EU and US
7) Electronic cigarette MSDS safety data sheet service – according to EU 2001/58/EC, 1999/45/EC, 67/548/EEC, Regulation (EC) No. 1907/2006; US 29 CFR 1910.1200(g), ISO 11014 -1 and other international standards to issue safety data sheets.
8) Export to EU RoHS Directive
China: CCC certification, CQC certification, shopping mall quality inspection report, security product report commissioned by the Ministry of Public Security, water wading product approval documents, ISO9001 certification, ISO14001 certification, TS16949 certification, lithium battery aviation safety certification, air purifier testing
America: FDA testing, FDA registration, FCC certification, BQB certification, UL certification, CPSC certification, ASTM certification, California 65 certification, ETL certification, CEC certification, ENERGY STAR certification
Europe: CE certification ROHS testing REACH testing EUP energy efficiency testing TUV certification GS certification SGS certification
Asia: SASO certification PSE certification TELEC certification KC certification BSMI certification NCC certification BIS certification Middle East COC certification
Australia: GEMS energy efficiency certification CTICK certification SAA certification RCM certification
Africa: COC certification in various African countries

The battery of the electronic cigarette is 380 mAh, and the daily power bank and mobile phone battery is more than 5000 mAh. Compared with the smaller mAh of the electronic products used, the explosion probability of the electronic cigarette with short circuit protection function is actually very low. of.

Both the big smoke and the slight smoke are composed of atomizers, batteries, and e-liquid. The most significant difference is in appearance, heating power, and nicotine content; Therefore, the small cigarette is between 100 and 200, and the relative taste is more delicate; the small cigarette uses nicotine salt, which is lower in cost, stronger in throat hit, and lower in nicotine content.

The small cigarette switch design is an air flow sensing device, commonly known as the microphone head. The flow of air will trigger the current to drive the electronic cigarette to work.

The more excellent the suction resistance of the electronic cigarette, the less air intake, the richer the taste, and the stronger the throat hit; too strong suction resistance will lead to the insufficient air intake and unsmooth use; too low suction resistance will cause Excessive air intake results in more diffuse smoke and a more airy taste.

E-cigarette oil leakage also accounts for a part of the reason. It is due to the design defect of the smoking device, the mismatch of rubber plugs, resulting in insufficient air tightness of the cartridge, or the deposition of condensate, and the suction is too strong. It may also be due to the design of the heating core. Mistakes lead to frying.

The microphone head controls the switch, the battery generates current and starts to work, and the heating device generates heat to atomize the e-liquid to generate smoke; the main component of the smoke in the e-liquid is vegetable glycerin, which is basically harmless to the human body and can be absorbed.

The cotton core is composed of cotton and heating wire. The cotton conducts oil quickly and has a high oil storage capacity, but it is not resistant to dry burning, and it is easy to paste the core if it is not used properly. The ceramic core is composed of ceramics and heating wire. Not much, but resistant to dry burning, sustainable suction, and long service life.

At present, the country has not clearly stipulated the use standards of electronic cigarette batteries, but most of the electronic cigarette batteries on the market use lithium batteries, and the power is mostly between 250 mA and 400 mA. Although the power is low, the safety is relatively high; The power of other electronic products is generally above 5000+ mA, the power is high, and the degree of danger is relatively increased.

Electronic cigarettes made of aluminum alloy and stainless steel are the most common ones, especially aluminum alloy electronic cigarettes. So is it better to use aluminum alloy or stainless steel for the electronic cigarette shell? Stainless steel has strong hardness and good rigidity; it can still maintain its excellent physical and mechanical properties at high temperatures; most stainless steel products require good gravitational corrosion resistance. Aluminum alloy is easy to process, has high durability, and has a wide range of applications; relatively high strength, can be processed into various profiles, has excellent electrical conductivity, thermal conductivity and corrosion resistance, and is widely used in industry; heat treatment can be used to obtain good mechanical properties Compared with the above two materials, aluminum alloys have advantages in terms of physical properties and corrosion resistance. In terms of cost, the price of aluminum alloys is relatively low. Secondly, compared with other metals, aluminum alloys have more mature technology and higher stability.

The charging output voltage of each mobile phone is different, there are 3.7V and 4.3V, and the output voltage of the electronic cigarette does not necessarily match when charging, long-term use is easy to lose battery life, basically only use the charger specially designed for your device, please do not Feel free to use the product or charger interchangeably, or use the original charger for another device. If you want to use other chargers, please confirm that the output voltage and current of the charger are suitable for your device, otherwise it may cause damage to the device, and it will be very dangerous.

Electronic cigarette rods are generally connected by magnetic force, which makes contact tighter and the disassembly and assembly easier. A straight metal wire carries an electric current, and a circular magnetic field is generated in the space around the wire. The greater the current flowing through the wire, the stronger the magnetic field produced. The magnetic field forms a circle around the wire. The magnetic field produced by a straight wire is similar to the effect of placing a ring of small magnets with NS poles end-to-end around the wire.

The ideal temperature for e-liquid atomization is 200 degrees Celsius; it takes a process for the heating wire to heat up, about 0.5-1 second; under different temperatures, the degree of e-liquid atomization is different, and the degree of resolution is also different. The volatilized water will come out first, and the temperature of the flue gas with high water content will be slightly higher, so the first few puffs of e-cigarette juice will be slightly different, please take one or two puffs gently to discharge, and then you can I sucked the burnt aroma from the spice itself.

Due to the wrong design of the heating core, the oil is fried, the design of the smoking device and the incompatibility of the rubber plug lead to the insufficient air tightness of the pod, which also accounts for part of the reason for the oil to fry; taste.

First, check whether it is turned on, whether the cigarette body or battery has electricity, and whether you have pressed the switch key when inhaling. Second, check whether the resistance value of the atomizer is normal. The atomizer of 0.0Ω and 9.9Ω or less can be determined to be For the faulty atomizer, if the above problems are normal, it may be that the contact between the cigarette rod and the atomizer is abnormal, the contact between the pod and the electrode of the smoking device is poor, and the circuit breaker cannot work.

During the process of e-liquid atomization, the smoke cannot be completely sucked, and some smoke will remain in the atomizer or pod. The smoke is cooled and condensed to form small water droplets, which accumulate into condensate. The principle is similar to that of distilled water. It’s not entirely e-liquid, the main components are water and a small amount of e-liquid.

Choosing a relatively mature brand on the market is due to more mature technology and higher product completion, followed by more choices of flavors, easy to choose, and better after-sales service. Check here to choice your prestige vapo: https://www.prestigevapo.com/index.php/all-products/

The main components of electronic cigarettes are PG, VG, flavors and fragrances, and nicotine. PG and VG are healthy food additives, flavors, and fragrances mainly provide various flavors, and nicotine provides addiction relief and throat hit. What is the reason for the dry throat when you smoked e-cigarettes for the first time? The main reason is PG. PG is also called vegetable glycerin. It is because of the smoke that the electronic cigarette produces when it is used. Water absorption is one of its characteristics. When we pump repeatedly, it will cause the water in the mouth to be absorbed. The more we pump, the more we absorb, so it will cause our throat to be very dry. The smoke produced by electronic cigarettes and the smoke produced by paper cigarettes is two different forms of things. Electronic cigarette oil atomizes a misty substance similar to water vapor, while paper cigarettes burn to produce smoke. When adapting to e-cigarettes in the early stage, everyone can use the method of “running cigarettes”, inhale quickly and exhale quickly, and slowly adapt to the smoke generated by e-liquid.

The fuel supply speed is too high, the suction force is too large, and the e-liquid is sucked into the mouth before it is wholly atomized into smoke, or the oil tank is not sealed enough, and it penetrates the ventilation pipe without being atomized. If you suck it directly into your mouth, if you accidentally inhale the e-juice or condensate, you will feel sweetness on your lips because the flavors contained in VG and e-juice have a certain sweetness. Release the ignition key at the end of inhalation to control the generation of condensate, which can reduce the occurrence of this situation.

After the e-juice is opened, it will be oxidized in contact with the air, especially the e-juice dripped in the dripping atomizer. If it is left for a period of time, the color of the e-juice will gradually turn reddish-brown. After opening the e-juice, be sure to tighten the cap tightly and do not receive direct light.

When the temperature drops, the fluidity of e-liquid will become worse, especially for some e-liquids with high VG content, the fluidity will become very poor when the temperature is low in winter.

The content of VG contained in the e-liquid is different, and the absorption speed of the cotton core is also different. E-juice with high VG content is used on atomizers with small oil guide holes, which will have the problem of poor oil guide.

The flavors used in some e-liquids can easily produce carbonized substances during the heating process, which is the main culprit that causes the coil to turn black and the cotton to change color. At the same time, the condensate returning from the inner wall of the atomizer will also aggravate the production of carbon deposits.

Generally speaking, the nicotine contained in e-liquid is the main substance that irritates the throat, and the e-liquid with high nicotine will cause strong irritation to the throat. At the same time, some types of fragrances can also irritate the throat after heating.

The water droplets in the nasal cavity are condensate, and the atomized smoke will change from fog to liquid when the temperature changes. Due to the water absorption of VG, it is not recommended to frequently spray the fumes through the nasal cavity.

Due to the different flavors used in the e-liquid, the irritation of the e-liquid to the throat is very different. Generally speaking, the irritation of the fruit-flavored e-liquid is much lower than that of the tobacco flavor. E-liquids with high VG content will feel more smooth to the throat during use.

Not everyone feels the same about e-liquids. It is completely normal for some heavy smokers to feel that e-cigarettes are boring or not as good as expected. But sometimes novice players have too little smoke due to equipment settings. Since I have no impression of the first sense of electronic cigarettes, I mistakenly think that electronic cigarettes have no taste, which is also the case.

An excellent atomizer may have its own style through the different degrees of air intake and atomization. A lot of players have 4 or 5 atomizers, but most people use only one. Because that nebulizer fits his own feelings very well. So when novice players choose atomizers, try to choose popular ones, and don’t be influenced by appearance and advertising words. Because most people’s choices are worth considering.

The moment the smoke is drawn into the mouth from the outlet, the nicotine contained in it will cause a slight irritation to your throat. It is similar to the irritating feeling of a cigarette when it enters the mouth, except that when a cigarette burns, there are not only nicotine but also many other chemical components, and the irritating feeling is even greater.

Everyone’s tolerance to nicotine is different. E-liquid itself is a product containing nicotine. If you feel dizzy when you smoke e-cigarettes, you can try e-liquid with low nicotine content, or e-liquid with no nicotine content. If you still feel dizzy, please stop using vaping products immediately, after all, health is not a child’s play.

Absolutely not. Some e-juices will become softer as the time of waking up increases, but not all e-juices are like this, and some e-juices will lose some of their due flavors after being stored for a long time. Any e-juice should be used up as soon as possible after opening. The e-juice has basically woken up before leaving the factory, and there is no need to wake up too much.

Each time you adjust the atomizer, even if the settings are the same, there will be slight differences. However, the reason that can affect the taste is mainly because the cotton core is continuously heated repeatedly, and some of it is still coked. If it is a new cotton wick and the taste has changed greatly, check whether the e-liquid has expired, or there is suspended matter, which has deteriorated.

Choosing a relatively mature brand on the market is due to more mature technology and higher product completion, followed by more choices of flavors, easy to choose, and better after-sales service. Check here to choice your prestige vapo: https://www.prestigevapo.com/index.php/all-products/